Mikael Olsson - Personlig presentation

Forskningsprojekt

Publikationer

Heinrichs, J., Norgren, S., Jacobson, S., Yvell, Karin, Olsson, Mikael. Influence of cemented carbide binder type on wear initiation in rock drilling – Investigated in sliding wear against magnetite rock, International journal of refractory metals & hard materials, 2019, Vol. 85. Artikel : refereegranskat.
Saketi, Sara, Bexell, Ulf, Östby, Jonas, Olsson, Mikael. On the diffusion wear of cemented carbide in the turning of 316L austenitic stainless steel, Wear, 2019, Vol. 430-431, 202-213. Artikel : refereegranskat.
Saketi, Sara, Odelros, S., Östby, J., Olsson, Mikael. Experimental study of wear mechanisms of cemented carbide in the turning of Ti6Al4V, Materials, 2019, Vol. 12, No. 7. Artikel : refereegranskat.
Saketi, Sara, Odelros, Stina, Östby, Jonas, Olsson, Mikael. Wear and wear mechanisms of cemented carbide in the turning of Ti6Al4V, Materials, 2019. Artikel : refereegranskat.
Heinrichs, J., Olsson, Mikael, Yvell, Karin, Jacobson, S. On the deformation mechanisms of cemented carbide in rock drilling : Fundamental studies involving sliding contact against a rock crystal tip, International journal of refractory metals & hard materials, 2018, Vol. 77, 141-151. Artikel : refereegranskat.

Heinrichs, Jannica, Olsson, Mikael, Almqvist, Bjarne, Jacobson, Staffan. Initial surface failure and wear of cemented carbides in sliding contact with different rock types, Wear, 2018, Vol. 408-409, 43-55. Artikel : refereegranskat.
Olsson, Mikael, Surreddi, Kumar Babu. Thin hard CVD and PVD coatings and their potential in steel wire drawing applications, Proceedings of The 18th Nordic Symposium on Tribology - NORDTRIB 2018 : 2018. Konferensbidrag : refereegranskat.
Olsson, Mikael, Surreddi, Kumar Babu. Scratch testing of cemented carbides - Influence of Co binder phase and WC grain size on surface deformation and degradation mechanisms, Proceedings of The 18th Nordic Symposium on Tribology - Nordtrib 2018 : 2018. Konferensbidrag : refereegranskat.
Saketi, Sara, Bexell, Ulf, Olsson, Mikael. Wear mechanism of cemented carbide cutting tool in the turning of 316L stainless steel, 2018. Konferensbidrag : refereegranskat.
Saketi, Sara, Östby, Jonas, Bexell, Ulf, Olsson, Mikael. Wear behaviour of two different cemented carbide grades in turning 316 L stainless steel, Materials Science Forum, 2018, Vol. 941, 2367-2372. Artikel : refereegranskat.
Surreddi, Kumar Babu, Oikonomou, C., Karlsson, P., Olsson, Mikael, Pejryd, L. In-situ micro-tensile testing of additive manufactured maraging steels in the SEM : Influence of build orientation, thickness and roughness on the resulting mechanical properties, La Metallurgia Italiana, 2018, No. 3, 27-33. Artikel : refereegranskat.
Surreddi, Kumar Babu, Olsson, Mikael. Wear of cemented carbide nibs in steel wire drawing, The 18th Nordic Symposium on Tribology – NORDTRIB 2018 : 2018. Konferensbidrag.
Surreddi, Kumar Babu, Yvell, Karin, Norgren, Susanne, Olsson, Mikael. Characterization of surface degradation and wear damage Of cemented carbide in rock drilling, The 18th Nordic Symposium on Tribology – NORDTRIB 2018 : 2018. Konferensbidrag.
Heinrichs, J., Olsson, Mikael, Jacobson, S. Initial deformation and wear of cemented carbides in rock drilling as examined by a sliding wear test, International journal of refractory metals & hard materials, 2017, Vol. 64, 7-13. Artikel : refereegranskat.
Olsson, Mikael, Yvell, Karin, Heinrichs, J., Bengtsson, M., Jacobson, S. Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drilling, Wear, 2017, Vol. 388-389, 81-92. Artikel : refereegranskat.
Pejryd, Lars, Larsson, Joakim, Olsson, Mikael. Process monitoring of wire drawing using vibration sensoring, CIRP - Journal of Manufacturing Science and Technology, 2017, Vol. 18, 65-74. Artikel : refereegranskat.
Saketi, Sara, Olsson, Mikael. Influence of CVD and PVD coating micro topography on the initial material transfer of 316L stainless steel in sliding contacts : A laboratory study, Wear, 2017, Vol. 388-389, 29-38. Artikel : refereegranskat.
Surreddi, Kumar Babu, Oikonomou, Christos, Karlsson, Patrik, Olsson, Mikael, Pejryd, Lars. In-situ Micro-tensile Testing of Additive Manufactured Maraging Steels in the SEM: Influence of Build Orientation, Thickness and Roughness on the Resulting Mechanical Properties, Proceedings Euro PM 2017: International Powder Metallurgy Congress and Exhibition2017 : 2017. Konferensbidrag : refereegranskat.
Heinrichs, Jannica, Olsson, Mikael, Jacobson, Staffan. Initial wear of cemented carbides in sliding contact with different rock types, Proceedings of the 17th Nordic Symposium on Tribology - Nordtrib 2016 : 2016. Konferensbidrag : refereegranskat.
Olsson, Mikael, Yvell, Karin, Heinrichs, Jannica, Bengtsson, Maria, Jacobson, Staffan. Surface degradation mechanisms of cemented carbide drill buttons exposed to iron ore rock drilling, Proceedings of the 17th Nordic Symposium on Tribology - Nordtrib 2016 : 2016. Konferensbidrag : refereegranskat.
Roizard, X., Heinrichs, J., Et Taouil, A., Jacobson, S., Olsson, Mikael, Melot, J. M., Lallemand, F. Insights into sliding wear and friction behavior of copper in ethanol containing alkylphosphonic acid molecules, Tribology International, 2016, Vol. 96, 141-148. Artikel : refereegranskat.
Saketi, Sara, Östby, J., Olsson, Mikael. Influence of tool surface topography on the material transfer tendency and tool wear in the turning of 316L stainless steel, Wear, 2016, Vol. 368–369, 239-252. Artikel : refereegranskat.
Westlund, V., Heinrichs, J., Olsson, Mikael, Jacobson, S. Investigation of material transfer in sliding friction-topography or surface chemistry?, Tribology International, 2016, Vol. 100, 213-223. Artikel : refereegranskat.
Wiklund, Urban, Olsson, Mikael, Jacobson, Staffan. Degradation mechanisms of matrix steel in rock drill bits, Proceedings of the 17th Nordic Symposium on Tribology - Nordtrib 2016 : 2016. Konferensbidrag : refereegranskat.
Hall, Josefin, Beglund, Tomas, Bexell, Ulf, Olsson, Mikael. Influence of microstructure and hard phase content on the mechanisms of deformation and wear of HIP:ed Stellite^® 190 composites, 2015. Konferensbidrag : refereegranskat.
Heinrichs, J, Olsson, Mikael, Jacobson, S. Initial deformation and wear of cemented carbides for rock drilling as evaluated by a sliding wear test, Proceedings of International Tribology Conference 2015 : 2015. Konferensbidrag : refereegranskat.
Heinrichs, J, Olsson, Mikael, Yvell, Karin, Jacobson, S. Soft rock scratches hard cemented carbide, Proceedings of Wear of Materials : 2015. Konferensbidrag : refereegranskat.
Heinrichs, J., Olsson, Mikael, Jacobson, S. Surface degradation of cemented carbides in scratching contact with granite and diamond : the roles of microstructure and composition, Wear, 2015, Vol. 342, 210-221. Artikel : refereegranskat.
Olsson, Mikael, Heinrichs, Jannica, Yvell, Karin, Jacobson, Staffan. Initial degradation of cemented carbides for rock drilling : model studies of the tribological contact against rock, International journal of refractory metals & hard materials, 2015, Vol. 52, 104-113. Artikel : refereegranskat.
Olsson, Mikael. Tråddragningens tribologi, Ingår i: Årsmöteskonferens/Nordisk trådteknisk förening, NTTF, 2015. Kapitel av bok.
Saketi, Sara, Sveen, Susanne, Gunnarsson, S, M’Sauobi, R, Olsson, Mikael. Wear of a high cBN content PCBN cutting tool during hard milling of powder metallurgy cold work tool steels, Wear, 2015, Vol. 332, 752-761. Artikel.
Ceron, Ermanno, Olsson, Mikael, Bay, Niels. Lubricant film breakdown and material pick-up in sheet forming of advanced high strength steels and stainless steels when using environmental friendly lubricants, Advanced Materials Research, 2014, Vol. 966-967, 219-227. Artikel : refereegranskat.
Heinrich, Jannica, Olsson, Mikael, Jenei, Istvan Zoltan, Jacobson, Staffan. Transfer of titanium in sliding contacts : new discoveries and insights revealed by in situ studies in the SEM, Wear, 2014, Vol. 315, No. 1-2, 87-94. Artikel : refereegranskat.
Heinrichs, J, Yvell, Karin, Olsson, Mikael, Jacobson, S. Influence of hardness and microstructure on the mechanisms of deformation and wear of cemented carbides for rock drilling, Proceedings of 16th Nordic Conference on Tribology, Aarhus, Denmark, June 10-13, 2014 : 2014. Konferensbidrag : refereegranskat.
Jacobson, S, Beste, U, Heinrichs, J, Olsson, Mikael, Wiklund, U. On the nature of cemented carbide wear in rock drilling, Hard Rock Tribology Course and Seminar, Tampere, Finland, November 4-5, 2014 : 2014. Konferensbidrag.
Olsson, Mikael, Heinrichs, J, Yvell, Karin, Jacobson, S. On the relevance of hardness as a material parameter in the deformation and wear of cemented carbides in rock drilling, 2014. Konferensbidrag : refereegranskat.
Olsson, Mikael, Heinrichs, J, Yvell, Karin, Jacobson, S. Towards a better understanding of the wear of cemented carbide drill bit inserts in rock drilling, 2014. Konferensbidrag.
Olsson, Mikael. Wear resistant materials in mining, drilling and rock handling, 2014. Konferensbidrag.
Olsson, Mikael. Tribological aspects of conventional wire drawing - A case study, 2014.
Olsson, Mikael. Surface and wear characteristics of electrical discharge machined (EDM) cemented carbide drawing dies, 2014.
Sveen, Susanne, M’Sauobi, R, Bexell, Ulf, Olsson, Mikael. PCBN hard turning of ball bearing steel : Influence of PVD coating deposition on tool wear and surface finish/surface integrity of machined surface, 2014. Manuskript.
Fallqvist, Mikael, Olsson, Mikael. The influence of surface defects on the mechanical and tribological properties of VN-based arc-evaporated coatings, Wear, 2013, Vol. 297, No. 1-2, 1111-1119. Artikel : refereegranskat.
Fallqvist, Mikael, Schultheiss, F, Olsson, Mikael, M’Sauobi, R, Ståhl, J E. Influence of CVD Al₂O₃coated tool surface micro topography on the tribological characteristics in metal cutting : part I, Wear, 2013, 87-98. Artikel : refereegranskat.
Heinrichs, J, Olsson, Mikael, Jacobson, S. Initiation of Galling in Metal Forming : Differences Between Aluminium and Austenitic Stainless Steel Studied In Situ in the SEM, Tribology letters, 2013, Vol. 50, No. 3, 431-438. Artikel : refereegranskat.
Heinrichs, J, Olsson, Mikael, Jacobson, S. Influence of tool steel microstructure on initial material transfer in metal forming : in situ studies in the SEM, Wear, 2013, Vol. 302, No. 1-2, 1249-1256. Artikel : refereegranskat.
Heinrichs, J, Olsson, Mikael, Jenei, I. Z,, Jacobson, S. Transfer of titanium in sliding contacts – New discoveries and insights revealed by in situ studies in the SEM, Proceedings of World Tribology Congress 2013, Torino, Italy, September 8 – 13, 2013 : 2013. Konferensbidrag : refereegranskat.
Jacobson, S, Heinrichs, J, Olsson, Mikael. New experimental findings on the role of initial material transfer in determining friction and surface damage,, Proceedings of World Tribology Congress 2013, Torino, Italy, September 8 – 13, 2013 : 2013. Konferensbidrag : refereegranskat.
Nilsson, Maria, Olsson, Mikael. Microstructural, mechanical and tribological characterisation of roll materials for the finishing stands of the hot strip mill for steel rolling, Wear, 2013, Vol. 307, No. 1-2, 209-217. Artikel : refereegranskat.
Nilsson, Maria, Olsson, Mikael. An investigation of worn work roll materials used in the finishing stands of the hot strip mill for steel rolling, Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology, 2013, Vol. 227, No. 8, 837-844. Artikel : refereegranskat.
Olovsjö, S, Johanson, R, Falsafi, M, Bexell, Ulf, Olsson, Mikael. Surface failure and wear of cemented carbide rock drill buttons : the importance of sample preparation and optimized microscopy settings, Wear, 2013, Vol. 302, No. 1-2, 1546-1554. Artikel : refereegranskat.
Olsson, Mikael. On the use of scratch testing as a model experiment for evaluating the initial wear of cemented carbidein rock drilling, 2013. Konferensbidrag : refereegranskat.
Safara Nosar, Nima, Olsson, Mikael. Influence of tool steel surface topography on adhesion and material transfer in stainless steel/tool steel sliding contact, Wear, 2013, Vol. 303, No. 1-2, 30-39. Artikel : refereegranskat.
Schultheiss, F, Fallqvist, Mikael, M’Sauobi, R, Olsson, Mikael, Ståhl, J E. Influence of CVD Al₂O₃coated tool surface micro topography on the tribological characteristics in metal cutting : part II, Wear, 2013, Vol. 298, 23-31. Artikel : refereegranskat.
Sveen, Susanne, Andersson, J, M’Sauobi, R, Olsson, Mikael. Scratch adhesion characteristics of PVD TiAlN deposited on high speed steel, cemented carbide and PCBN substrates, Wear, 2013, Vol. 308, No. 1-2, 133-141. Artikel : refereegranskat.
Bexell, Ulf, Olsson, Mikael, Jani, Simon, Lundberg, Mats W. Initial oxidation of ferritic interconnect steel, effect due to a thin ceria coating, European Fuel Cell Forum 2012 - Proceedings (memory stick) : 2012. Konferensbidrag.
Fallqvist, Mikael, M’Sauobi, R, Andersson, J, Olsson, Mikael. Mechanical and tribological properties of PVD-coated cemented carbide as evaluated by a new multi-pass scratch testing method, Advances in Tribology, 2012, No. 305209. Artikel : refereegranskat.
Fallqvist, Mikael, Ruppi, S, Olsson, Mikael, Ottosson, M, Grehk, Mikael. Nucleation and growth of CVD α-Al₂O₃on Ti_xO_y template, Surface & Coatings Technology, 2012, Vol. 207, 254-261. Artikel : refereegranskat.
Heinrichs, Jannica, Olsson, Mikael, Jacobson, Staffan. Mechanisms of material transfer studied in situ in the SEM : explanations to the success of DLC coated tools in aluminium forming, Wear, 2012, Vol. 292, 49-60. Artikel : refereegranskat.
Heinrichs, Jannica, Olsson, Mikael, Jacobson, Staffan. New understanding of the initiation of material transfer and transfer layer build-up in metal forming : in situ studies in the SEM, Wear, 2012, Vol. 292, 61-73. Artikel : refereegranskat.
Karlsson, P, Eriksson, Jenny, Gaard, A, Krakhmalev, P, Olsson, Mikael, Bergstrom, J. Galling resistance evaluation of tool steels by two different laboratory test methods for sheet metal forming, Lubrication Science, 2012, Vol. 24, No. 6, 263-272. Artikel : refereegranskat.
Nilsson, Maria, Olsson, Mikael. An investigation of worn work roll materials used in the finishing stands of the hot strip mill for steel rolling, 2012. Konferensbidrag : refereegranskat.
Olovsjö, S, Johanson, R, Bexell, Ulf, Olsson, Mikael. On the understanding of cemented carbide degradation in rock drilling : the importance of metallographic sample preparation, Proceedings of Euro PM 2012 Congress & Exhibition Vol. 2 : 2012. Konferensbidrag : refereegranskat.
Olsson, Mikael, Högman, B. Influence of tool steel microstructure on the prevailing wear mechanisms in metal powder compaction, TOOL 2012 : proceedings of the 9th international tooling conference, developing the world of tooling, Montanuniversität Leoben 11-14 September 2012 : 2012. Konferensbidrag : refereegranskat.
Bexell, Ulf, Olsson, Mikael, Lundberg, M. High temperature oxidation of plastically deformed ferritic interconnect steel, ECS Transactions, 2011, Vol. 35, No. 1, 2463-2470. Artikel : refereegranskat.
Eriksson, Jenny, Olsson, Mikael. Tribological testing of commercial CrN, (Ti,Al)N and CrC/C PVD coatings : evaluation of galling and wear characteristics against different high strength steels, Surface & Coatings Technology, 2011, Vol. 205, No. 16, 4045-4051. Artikel : refereegranskat.
Hatami, S., Armada, S., Laurent, A., Nyborg, L., Olsson, Mikael. Tribological properties of powder metallurgical tool steels used in powder compaction pressing dies, Lubrication Science, 2011, Vol. 23, No. 3, 139-152. Artikel : refereegranskat.
Nilsson, Maria, Olsson, Mikael. Tribological testing of some potential PVD and CVD coatings for steel wire drawing dies, Wear, 2011, Vol. 273, No. 1, 55-59. Artikel : refereegranskat.
Olsson, Mikael, Bexell, Ulf. Friction characteristics and material transfer tendency in metal powder compaction, Wear, 2011, Vol. 271, No. 9-10, 1903-1908. Artikel : refereegranskat.
Olsson, Mikael, Karlsson, P., Eriksson, Jenny, Gåård, A., Krakhmalev, P., Bergström, J. Galling resistance evaluation of tool steels by two different laboratory test methods for sheet metal forming, Proceedings of the 18th International Conference on Wear of Materials : 2011. Konferensbidrag.
Olsson, Mikael, Malmros, M., Bexell, Ulf, Wiklund, U. Assessing the mechanical and electrical properties of aluminium oxid on aluminium using nanoindentation and nonoscratching, Proccedings of the 18th International Conference on Wear of Materials : 2011. Konferensbidrag.
Olsson, Mikael, Wadman, B., Eriksson, Jenny, Schedin, E., Madsen, E., Bay, N. Influence of stainless steel surface texture on galling, Proceedings of the 18th International Conference on Wear of Materials : 2011. Konferensbidrag.
Olsson, Mikael. Tribologi i samband med pulverkompaktering, Stålforskningsdagar 2011 : materialteknik vid Högskolan Dalarna : 2011. Konferensbidrag.
Olsson, Mikael. Influence of tool steel microstructure on the prevailing wear mechanisms in metal powder compaction, Proceednings of the 18th International Conference on Wear of Materials : 2011. Konferensbidrag.
Olsson, Mikael. Tribological evaluation of some potential tribo materials used in column lift rolling contacts : a case study, Wear, 2011, Vol. 270, No. 9-10, 720-724. Artikel : refereegranskat.
Olsson, Mikael. A new test method for measuring the galling resistance between metal powders and die tool materials in powder compaction, Wear, 2011, Vol. 273, No. 1, 49-54. Artikel : refereegranskat.
Bexell, Ulf, Schuisky, Mikael, Olsson, Mikael. Scratch testing as a tool to evaluate the adhesion of thermally grown oxides on ferritic interconnect steel, 2010 Conference Memory Stick 9th European SOFC Forum : 2010. Konferensbidrag.
Canovic, Sead, Engkvist, Josefin, Liu, Fang, Götlind, Helena, Hellström, Kristina, Svensson, Jan-Erik, Johansson, Lars-Gunnar, Olsson, Mikael, Halvarsson, Mats. Microstructural investigation of the initial oxidation of the FeCrAlRE alloy Kanthal AF in dry and wet O2 at 600 and 800°C, Journal of the Electrochemical Society, 2010, Vol. 157, No. 6, C223-C230. Artikel : refereegranskat.
Engkvist, Josefin, Canovic, Sead, Hellström, Kristina, Järdnäs, Anders, Svensson, Jan-Erik, Johansson, Lars-Gunnar, Olsson, Mikael, Halvarsson, Mats. Alumina scale formation on a powder metallurgical FeCrAl alloy (Kanthal APMT) at 900-1100 °C in dry O2 and in O2 + H2O, Oxidation of Metals, 2010, Vol. 73, No. 1-2, 233-253. Artikel : refereegranskat.
Eriksson, Jenny, Olsson, Mikael. Evaluation of galling resistance for some selected combinations of tool steels/stainless steel sheet materials/lubricants using pin-on-disc testing, NordTrib 2010 : 2010. Konferensbidrag.
Fallqvist, Mikael, Olsson, Mikael. The role of surface defects on the surface fatigue and tribological characteristics of VxN-PVD coatings in sliding contacts, 14th Nordtrib Conference : 2010. Konferensbidrag.
Hörnström, S. -E, Karlsson, E., Losch, A., Olsson, Mikael, Bay, N. Forming of high-strength steels using a hot-melt dry lubricant, 17th International Colloquium Tribology 2010 - Solving Friction and Wear Problems : 2010. Konferensbidrag : refereegranskat.
Lindgren, Lars-Erik, Olsson, Mikael, Carlsson, Per. Simulation of hydroforming of steel tube made of metastable stainless steel, International journal of plasticity, 2010, Vol. 26, No. 11, 1576-1590. Artikel : refereegranskat.
Nilsson, Maria, Olsson, Mikael. Tribological Testing of Some Potential PVD and CVD Coatings for Steel Wire Drawing Dies, Nordtrib 2010 : 2010. Konferensbidrag : refereegranskat.
Olsson, Mikael, Sandberg, Odd. Tribological evaluation of tool materials for powder compaction, Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010 : 2010. Konferensbidrag : refereegranskat.
Olsson, Mikael. A new test method for measuring the galling resistance between metal powders and die tool materials in powder compaction, 14th Nordtrib Conference : 2010. Konferensbidrag : refereegranskat.
Wadman, Boel, Eriksson, Jenny, Olsson, Mikael, Schedin, Erik, Madsen, Erik, Bay, Niels. Influence of surface texture on the galling characteristics of lean duplex and austenitic stainless steels, Duplex World 2010 Conference & Exhibition : 2010. Konferensbidrag.
Engkvist, Josefin, Bexell, Ulf, Grehk, Mikael, Olsson, Mikael. High temperature oxidation of FeCrAl-alloys : influence of Al-concentration on oxide layer characteristics, Materials and corrosion - Werkstoffe und Korrosion, 2009, Vol. 60, No. 11, 876-881. Artikel : refereegranskat.
Engkvist, Josefin, Canovic, S., Liu, F., Gotlind, H., Svensson, J. -E, Johansson, L. -G, Olsson, Mikael, Halvarsson, M. Oxidation of FeCrAl foils at 500-900 degrees C in dry O₂ and O₂ with 40% H₂O, Materials at High Temperature, 2009, Vol. 26, No. 2, 199-210. Artikel : refereegranskat.
Engkvist, Josefin, Canovic, Sead, Liu, Fang, Götlind, Helena, Svensson, Jan-Erik, Johansson, Lars-Gunnar, Olsson, Mikael, Halvarsson, Mats. Oxidation of FeCrAl foils at 500-900 C in dry O2 and O2 with 40% H2O, 7th Int. Conf. on the Microscopy of Oxidation : 2009. Konferensbidrag.
Engkvist, Josefin, Grehk, Mikael, Bexell, Ulf, Olsson, Mikael. Early stages of oxidation of uncoated and PVD SiO₂ coated FeCrAl foils, Surface & Coatings Technology, 2009, Vol. 203, No. 19, 2845-2850. Artikel : refereegranskat.
Eriksson, Jenny, Olsson, Mikael. Ranking the performance of lubricants, tool steels and PVD coatings for the forming of high strength steel using pin-on-disc testing, Tool 09 : 2009. Konferensbidrag.
Eriksson, Jenny, Olsson, Mikael. Galling resistance of some selected tool steel/high strength steel sheet materialsas evaluated under lubricated sliding conditions using pin-on-disc testing, Wear of Materials : 2009. Konferensbidrag.
Eriksson, Jenny, Olsson, Mikael. Galling and wear characteristics of some commercial PVD coatings as evaluated by tribological testing, International conferens on metallurgical coatings and thin films (ICMCTF) : 2009. Konferensbidrag.
Fallqvist, Mikael, Olsson, Mikael, Andersson, Jon, Msauobi, Rachid. The influence of surface topography on the formation of build-up layers and wear of CVD-Al2O3 coatings, Wear of Materials : 2009. Konferensbidrag.
Harlin, Peter, Bexell, Ulf, Olsson, Mikael. Influence of surface topography of arc-deposited TiN and sputter-deposited WC/C coatings on the initial material transfer tendency and friction characteristics under dry sliding contact conditions, Surface & Coatings Technology, 2009, Vol. 203, No. 13, 1748-1755. Artikel : refereegranskat.
Harlin, Peter, Olsson, Mikael. Abrasive wear resistance of starch consolidated and sintered high speed steel, Wear, 2009, Vol. 267, No. 9-10, 1482-1489. Artikel : refereegranskat.
Nilsson, Maria, Olsson, Mikael. On the possibility to replace cemented carbide with CVD and PVD coated steelin wire drawing dies – A tribological investigation, Wear of Materials : 2009. Konferensbidrag.
Rendon, José, Olsson, Mikael. Abrasive wear resistance of some commercial abrasion resistant steels evaluated by laboratory test methods, Wear, 2009, Vol. 267, No. 11, 2055-2061. Artikel : refereegranskat.
Borgström, Henrik, Harlin, Peter, Olsson, Mikael, Paiar, Tomaso, Wang, Yu, Nyborg, Lars. Possibilities and constraints of implementing starch consolidated high speed steel in prototyping, Materials Science & Engineering, 2008, Vol. 475, No. 1-2, 34-38. Artikel : refereegranskat.
Canovic, Sead, Engkvist, Josefin, Lai, Haiping, Götlind, Helena, Svensson, Jan-Erik, Johansson, Lars-Gunnar, Olsson, Mikael. Microstructural investigation of the water vapour effect on the oxidation of the FeCrAl alloy Kanthal AF at 600 and 800 C, 214th Meeting of ECS - The Electrochemical Society : 2008. Konferensbidrag.
Engkvist, Josefin, Canovic, Sead, Järdnäs, Anders, Svensson, Jan-Erik, Johansson, Lars-Gunnar, Halvarsson, Mats, Olsson, Mikael. Microstructural investigation of the effect of watr vapour on the oxidation of a FeCrAl alloy (Sandvik APMT), 214th Meeting of ECS-The Electrochemical Society : 2008. Konferensbidrag.
Hörnström, Sven-Erik, Karlsson, Erik, Olsson, Mikael, Bay, Niels, Losch, Achim. Forming of high strength steels using a hot-melt lubricant, Best in Class Stamping, IDDRG : 2008. Konferensbidrag : refereegranskat.
Olsson, Mikael, Hogmark, Sture. Wear mechanisms of HSS cutting tools, Gear Solutions, 2008, Vol. June, 20-29. Artikel : refereegranskat.
Berglund, T., Olsson, Mikael. High velocity compaction of high speed steel powder : possibilities and constraints, Proceedings of the Euro Powder Metallurgy Congress and Exhibition, Euro PM 2007 : 2007. Konferensbidrag : refereegranskat.
Fallqvist, Mikael, Olsson, Mikael, Ruppi, S. Abrasive wear of textured-controlled CVD a-Al₂O₃ coatings, Surface & Coatings Technology, 2007, Vol. 202, No. 4-7, 837-843. Artikel : refereegranskat.
Fallqvist, Mikael, Olsson, Mikael, Ruppi, Sakari. Abrasive wear of multilayer kappa-Al₂O₃-Ti(C,N) CVD coatings on cemented carbide, Wear, 2007, Vol. 263, No. 1-6, 74-80. Artikel : refereegranskat.
Harlin, P., Olsson, Mikael. Starch consolidation of M3/2 high speed steel powder : Influence of microstructure on mechanical properties, Powder Metallurgy, 2007, Vol. 50, No. 3, 232-238. Artikel : refereegranskat.
Harlin, Peter, Olsson, Mikael. Starch consolidation of M3/2 high speed steel powder : influence of process parameters on resulting microstructure, Powder Metallurgy, 2007, Vol. 50, No. 4, 345-353. Artikel : refereegranskat.
Harlin, Peter, Olsson, Mikael. Starch consolidation of M3/2 high speed steel - Influence of sintering temperature on mechanical properties, Powder Metallurgy, 2007, Vol. 50, No. 3, 232-238. Artikel : refereegranskat.
Prosek, T., Thierry, D., Olsson, Mikael, Bexell, Ulf. Effects of chloride-to-chromate ratio on the protective action of zinc surface films under atmospheric weathering conditions, Corrosion, 2007, Vol. 63, No. 3, 258-267. Artikel : refereegranskat.
Bexell, Ulf, Berger, Robert, Olsson, Mikael, Grehk, Mikael, Sundell, Per-Erik, Johansson, Mats. Bonding of vegetable oils to mercapto silane treated metal surfaces: surface engineering on the nano scale, Thin Solid Films, 2006, Vol. 515, No. 2, 838-841. Artikel : refereegranskat.
Carlsson, Per, Olsson, Mikael. PVD coatings for sheet metal forming : a tribological evaluation, Surface & Coatings Technology, 2006, Vol. 200, No. 14-15, 4654-4663. Artikel : refereegranskat.
Harlin, Peter, Carlsson, Per, Bexell, Ulf, Olsson, Mikael. Influence of surface roughness of PVD coatings on tribological performance in sliding contacts, Surface & Coatings Technology, 2006, Vol. 201, No. 7, 4253-4259. Artikel : refereegranskat.
Bexell, Ulf, Grehk, Mikael, Olsson, Mikael, Gelius, Ulrik. XPS and AES Characterisation of hydrolysed ?-Mercaptopropyltrimethoxysilane deposited on Al, Zn and Al-43.4Zn-1.6Si alloy coated steel, Surface and Interface Analysis, 2004, No. 36, 624-631. Artikel : refereegranskat.
Engkvist, Josefin, Bexell, Ulf, Grehk, Mikael, Olsson, Mikael. ToF-SIMS Analysis of a FeCrAl Alumina Forming Alloy, SIMS Europe 2004 : 2004. Konferensbidrag.
Bexell, Ulf, Carlsson, Per, Olsson, Mikael. Tribological Characterisation of an Organic Coating by the use of ToF-SIMS, Applied Surface Science, 2003, Vol. 203-204, 596-599. Artikel : refereegranskat.
Bexell, Ulf, Olsson, Mikael, Johansson, M, Samuelsson, J, Sundell, P.-E. A Tribological Study of a Novel Pre-Treatment With Linseed Oil Bonded to Mercaptosilane Treated Aluminium, Surface & Coatings Technology, 2003, No. 166, 141-152. Artikel : refereegranskat.
Bexell, Ulf, Olsson, Mikael, Johansson, M, Sundell, P.-E, Carlsson, Per, Hellsing, Magnus. A ToF-SIMS Study of Linseed Oil Bonded to Mercaptosilane Treated Aluminium, Proceedings of the 14th International Conference on Secondary Ion Mass Spectrometry, SIMS XIV : 2003. Konferensbidrag : refereegranskat.
Bexell, Ulf, Olsson, Mikael. Time-of-Flight SIMS Characterization of Hydrolysed Organofunctional and Non-Organofunctional Silanes Deposited on Al, Zn and Al-43.4Zn-1.6Si Alloy-Coated Steel, Surface and Interface Analysis, 2003, Vol. 35, No. 11, 880-887. Artikel : refereegranskat.
Engkvist, Josefin, Bexell, Ulf, Grehk, Mikael, Olsson, Mikael. ToF-SIMS Depth Profiling of Alumnia Formed on a FeCrAl High Temperature Alloy, Proceedings of the 14th International Conference on Secondary Ion Mass Spectrometry : 2003. Konferensbidrag : refereegranskat.
Johansson, M, Samuelsson, J, Sundell, P.-E, Bexell, Ulf, Olsson, Mikael. Radiation Induced Polymerization of Monomers From Renewable Resources, Polymer Preprints, 2003, Vol. 44, No. 1, 19-20. Artikel : refereegranskat.
Bexell, Ulf, Olsson, Mikael. Characterisation of a Non-Organofunctional Silane Film Deposited on Al, Zn and Al-43.4Zn-1.6Si Alloy-Coated Steel, Part I. Surface Characterization by ToF-SIMS, Surface and Interface Analysis, 2001, Vol. 31, No. 3, 212-222. Artikel : refereegranskat.
Bexell, Ulf, Olsson, Mikael. Characterisation of a Non-Organofunctional Silane Film Deposited on Al, Zn and Al-43.4Zn-1.6Si Alloy Coated Steel, Part II. Interfacial Characterization by ToF-SIMS and AES, Surface and Interface Analysis, 2001, Vol. 31, No. 3, 223-231. Artikel : refereegranskat.
Carlsson, Per, Bexell, Ulf, Olsson, Mikael. Friction and Wear Mechanisms of Thin Organic Permanent Coatings Deposited on Hot-Dip Coated Steel, Wear, 2001, Vol. 247, No. 1, 88-99. Artikel : refereegranskat.
Carlsson, Per, Bexell, Ulf, Olsson, Mikael. Tribological Performance of Thin Organic Permanent Coatings Deposited on 55%Al-Zn Coated Steel – Influence of Coating Composition and Thickness on Friction and Wear, Wear, 2001, Vol. 251, No. 1-12, 1075-1084. Artikel : refereegranskat.
Carlsson, Per, Bexell, Ulf, Olsson, Mikael. Automatic Scratch Testing - A New Tool for Evaluating the Stability of Tribological Conditions in Sheet Metal Forming, GALVATECH 2001 : 2001. Konferensbidrag.
Carlsson, Per, Bexell, Ulf, Olsson, Mikael. Tribological Behaviour of Thin Organic Permanent Coatings Deposited on Hot-Dip Coated Steel Sheet - a Laboratory Study, Surface & Coatings Technology, 2000, Vol. 132, No. 2-3, 169-180. Artikel : refereegranskat.
Bexell, Ulf, Carlsson, Per, Olsson, Mikael. Characterisation of Thin Films of a Non-Organofunctional Silane on Al-43.4Zn-1.6Si Alloy Coated Steel by ToF-SIMS, SIMS XII : 1999. Konferensbidrag : refereegranskat.
Carlsson, Per, Bexell, Ulf, Olsson, Mikael, Klang, Hans. A study of the initial stages of atmospheric corrosion of formed hot dip zinc coated steel, EUROCORR-97 : 1997. Konferensbidrag.
Carlsson, Per, Bexell, Ulf, Olsson, Mikael, Klang, Hans. Initial Atmospheric Corrosion Behavior of Formed Hot Dip Zinc Coated Steel - An Energy Dispersive X-ray Spectroscopy Study, SCANDEM-97 : 1997. Konferensbidrag.

logotyp Högskolan Dalarna