2010DissertationsHansson, Sofia. Modeling of the Stainless Steel Tube Extrusion Process. Luleå, Luleå University of Technology, 2010. (978-91-7439-064-3) Refereed articles, books, reports and book chaptersEngkvist, Josefin, Canovic, Sead, Hellström, Kristina, Järdnäs, Anders, Svensson, Jan-Erik, Johansson, Lars-Gunnar, Olsson, Mikael, Halvarsson, Mats. Alumina scale formation on a powder metallurgical FeCrAl alloy (Kanthal APMT) at 900-1100 C in dry O2 and in O2 + H2O . Oxidation of Metals, Vol. 73, No. 1-2, 2010, pp. 233-253. Granbom, Ylva, Ryde, Lena, Jeppsson, Johan. Simulation of the soaking and gas jet cooling in a continuous annealing line using dilatometry . Steel Research International, 2010. Kommande Lindgren, Lars-Erik, Olsson, Mikael, Carlsson, Per. Simulation of hydroforming of steel tube made of metastable stainless steel . International Journal of Plasticity, 2010. pp. 15. Kommande Olsson, Mikael, Canovic, Sead, Engkvist, Josefin, Liu, Fang, Götlind, Helena, Hellström, Kristina, Svensson, Jan-Erik, Johansson, Lars-Gunnar, Halvarsson, Mats. Microstructural Investigation of the Initial Oxidation of the FeCrAlRE Alloy Kanthal AF in Dry and Wet O2 at 600 and 800°C . Journal of The Electrochemical Society, Vol. 157, No. 6, 2010, pp. C223-C230. Refereed conference publicationsNilsson, Maria, Olsson, Mikael. Tribological Testing of Some Potential PVD and CVD Coatings for Steel Wire Drawing Dies. Nordtrib 2010, Storforsen, 8-11 juni, 2010, pp. 8. Olsson, Mikael. A new test method for measuring the galling resistance between metal powders and die tool materials in powder compaction . 14th Nordtrib Conference , Storforsen, Sweden, 8-11 juni 2010, 2010. pp. 8. Kommande Olsson, Mikael, Sandberg, Odd. Tribological Evaluation of Tool Materials for Powder Compaction . PM 2010 Powder Metallurgy World Congress , Florence, 10-14 oktober 2010, 2010. pp. 8. Kommande Other articles, conference publications, books, reports and book chaptersBexell, Ulf, Schuisky, Mikael, Olsson, Mikael. Scratch testing as a tool to evaluate the adhesion of thermally grown oxides on ferritic interconnect steel . 9th European SOFC Forum , Lucerne, 29 June- 2 July, 2010. Kommande Bexell, Ulf, Schuisky, Mikael, Ravash, Hamed, Froitzheim, Jan, Svensson, Jan-Erik. Chromium evaporation from plastically deformed pre-coated Sandvik Sanergy HT 22% Cr ferritic interconnect steel . 9th European SOFC Forum , Lucerne, 29 June- 2 July, 2010. Kommande Fallqvist, MikaelOlsson, Mikael. The role of surface defects on the surface fatigue and tribological characteristics of VxN-PVD coatings in sliding contacts . 14th Nordtrib Conference , Storforsen, 8-11 juni, 2010. Kommande Other articles, conference publications, books, patents, reports and book chaptersOlsson, Mikael. Tribological evaluation of some potential tribo materials used in column lift rolling contacts - A case study. Wear, 2010. Kommande 2009DissertationsLindgren, Michael. Experimental and Computational Investigation of the Roll Forming Process. 2009. (978-91-7439031-5) Storck, Joakim. Strategic and operational capabilities in steel production : Product variety and performance. TRITA-IIP-09-08, Stockholm, KTH, 2009. (978-91-7415-507-5) Valyukh, Iryna. Optical Characterization and Optimization of Display Components: Some Applications to the Liquid-Crystal-Based and Electrochromics-Based Devices . No. 664, Uppsala, Acta Universitatis Upsaliensis, 2009. (978-91-554-7583-3) Refereed articles, books, reports and book chaptersEngkvist, Josefin, Bexell, Ulf, Grehk, Mikael, Olsson, Mika. High temperature oxidation of FeCrAl-alloys – influence of
Al-concentration on oxide layer characteristics . Materials and Corrosion, Vol. 60, No. 11, 2009, pp. 876-881. Engkvist, Josefin, Grehk, Mikael, Bexell, Ulf, Olsson, Mika. Early stages of oxidation of uncoated and PVD SiO2 coated FeCrAl foils
. Surface & Coatings Technology, Vol. 203, No. 19, 2009, pp. 2845–2850. Harlin, Peter, Bexell, Ulf, Olsson, Mikael. Influence of surface topography of arc-deposited TiN and sputter-deposited WC/C coatings on the initial material transfer tendency and friction characteristics under dry sliding contact conditions . Surface and Coatings Technology, Vol. 203, No. 13, 25 March 2009, 2009, pp. 1748-1755. Harlin, Peter, Olsson, Mikael. Abrasive wear resistance of starch consolidated and sintered high speed steel . Wear, Vol. 267, No. 9-10, 2009, pp. 1482-1489. Lindgren, Michael, Bexell, Ulf, Wikström, Lars. Roll forming of partially heated cold rolled stainless steel . Journal of materials processing technology, Vol. 209, No. 7, 2009, pp. 3117–3124. Rendon, José, Olsson, Mikael. Abrasive wear resistance of some commercial abrasion resistant steels evaluated by laboratory test methods . Wear, Vol. 267, No. 11, 2009, pp. 2055-2061. Storck, Joakim. Exploring improvement trajectories with dynamic process cost modelling : A case from the steel industry. International Journal of Production Research, June 3, 2009. pp. 19. Kommande Refereed conference publicationsFisk, Martin, Hansson, Sofia. FE-Simulation of combined induction heating and extrusion in manufacturing of stainless steel tubes . Computational Plasticity (COMPLAS) X , Barcelona, 2-4 maj, 2009, pp. 4. Lindgren, Michael, Ingmarsson, Lars-Olof. 3D roll-forming of hat-profile with variable depth and width. Rollform09 1st International congress on roll forming, Bilbao, Spain, 14-15 October, 2009. Storck, Joakim. Product variety and upstream versus downstream flexibility . I: Proceedings of the International 3'rd Swedish Production Symposium, Rosén, B.G.;, Swedish Production Symposium , Göteborg, December 2-3, 2009. pp. 304-309. (978-91-633-6006-0) Other articles, conference publications, books, reports and book chaptersEngkvist, Josefin, Canovic, Sead, Liu, Fang, Götlind, Helena, Svensson, Jan-Erik, Johansson, Lars-Gunnar, Olsson, Mikael, Halvarsson, Mats. Oxidation of FeCrAl foils at 500-900 C in dry O2 and O2 with 40% H2O . 7th Int. Conf. on the Microscopy of Oxidation , Chester, UK, 15-17 September , 2009, pp. 8. Eriksson, Jenny, Olsson, Mikael. Ranking the performance of lubricants, tool steels and PVD coatings for the forming of high strength steel using pin-on-disc testing. Tool 09, Aachen, 2-4 juni, 2009. Eriksson, Jenny, Olsson, Mikael. Galling resistance of some selected tool steel/high strength steel sheet materials
as evaluated under lubricated sliding conditions using pin-on-disc testing . Wear of Materials , Las Vegas, 19-23 April, 2009. Eriksson, Jenny, Olsson, Mikael. Galling and wear characteristics of some commercial PVD coatings as evaluated by tribological testing . International conferens on metallurgical coatings and thin films (ICMCTF) , San Diego, 27 april - 1 maj, 2009. Fallqvist, Mikael, Olsson, Mikael, Andersson, Jon, Msauobi, Rachid. The influence of surface topography on the formation of build-up layers and wear of CVD-Al2O3 coatings . Wear of Materials , Las Vegas, 19-23 april, 2009. Other articles, conference publications, books, patents, reports and book chaptersFilipovic, Mirjana, Jonsson, Stefan. Experimental and Numerical study of the Evolution of Artificial Inner Defects in Stainless Steel rolled in a Wire Rod Block . Journal of Materials Processing Technology, 2009. Kommande Other articles, conference publications, books, reports and book chaptersNilsson, Maria, Olsson, Mikael. On the possibility to replace cemented carbide with CVD and PVD coated steel
in wire drawing dies – A tribological investigation
. Wear of Materials, Las Vegas, 19-23 april, 2009. 2008DissertationsHarlin, Peter. On the processing of starch consolidated high speed steel : Microstructure and tribological properties. Göteborg, Charlmers University of Technology, 2008. (978-91-7385-110-7) Refereed articles, books, reports and book chaptersBorgström, Henrik, Harlin, Peter, Olsson, Mikael, Paiar, Tomaso, Wang, Yu, Nyborg, Lars. Possibilities and constraints of implementing starch consolidated high speed steel in prototyping . Materials Science and Engineering A, Structural materials, Vol. 475, 2008, pp. 34-38. Engberg, Göran, Lissel, Linda. A Physically based Microstructure Model for Predicting the Microstructure Evolution of a C-Mn Steel during and after Deformation . Steel research international, Vol. 79, No. 1, jan. 2008, 2008, pp. 47-58. Granbom, Ylva. Effects of process parameters prior to annealing on the formability of two cold rolled dual phase steels. Steel Research international, Vol. 79, No. 4, April , 2008, pp. 297-305. Lindgren, Lars-Erik, Domkin, Konstantin, Hansson, Sofia. Dislocations, vacancies and solute diffusion in physical based plasticity model for AISI 316L . Mechanics of Materials, Vol. 40, No. 11, 2008, pp. 907-919. Olsson, Mikael, Hogmark, Sture. Wear mechanisms of HSS cutting tools . Gear Solutions, Vol. June, 2008, pp. 20-29. Prosek, T, Nazarov, A, Bexell, Ulf, Thierry, D, Serak, J. Corrosion mechanism of model zinc–magnesium alloys in atmospheric conditions . Corrosion Science, Vol. 50, No. 8, 2008, pp. 2216–2231. Refereed conference publicationsGranbom, Ylva, Bergström, Yngve. A dislocation model for the stress-strain behaviour of dual-phase steel. I: International Deep Drawing Research Group, IDDRG, Asnafi, Nader;, IDDRG, Best in Class Stamping, Olofström, 16-18 juni, 2008. pp. 173-184. (978-91-633-2948-7) Hörnström, Sven-Erik, Karlsson, Erik, Olsson, Mikael, Bay, Niels, Losch, Achim. Forming of high strength steels using a hot-melt lubricant . Best in Class Stamping, IDDRG , Olofström, Sweden, 16-18 juni, 2008, pp. 8. Lindgren, Michael. Validation of finite element model of roll forming . IDDRG , Olofström, 16-18 June, 2008. Lissel, Linda, Engberg, Göran, Borggren, Ulrika. MODELING PRECIPITATION AND ITS EFFECT ON RECRYSTALLIZATION DURING HOT STRIP ROLLING OF NIOBIUM STEELS. 3rd Int. Conf. on Thermomechanical Processing of Steels, Padua, Italy, 12-13 september, 2008, pp. 12. Storck, Joakim, Lindberg, Bengt. A Dynamic Cost Model for the Effect of Improved Process Flexibility in Steel Plants . I: Proceedings of the 41st CIRP Conference on Manufacturing Systems, The 41st CIRP Conference on Manufacturing Systems , Tokyo, Japan, 26 maj, 2008. Other articles, conference publications, books, reports and book chaptersCanovic, Sead, Engkvist, Josefin, Lai, Haiping, Götlind, Helena, Svensson, Jan-Erik, Johansson, Lars-Gunnar, Olsson, Mikael. Microstructural investigation of the water vapour effect on the oxidation of the FeCrAl alloy Kanthal AF at 600 and 800 C . 214th Meeting of ECS - The Electrochemical Society , Honolulu, Hawaii, 12-17 oktober, 2008, pp. 8. Engkvist, Josefin, Canovic, Sead, Järdnäs, Anders, Svensson, Jan-Erik, Johansson, Lars-Gunnar, Halvarsson, Mats, Olsson, Mikael. Microstructural investigation of the effect of watr vapour on the oxidation of a FeCrAl alloy (Sandvik APMT) . 214th Meeting of ECS-The Electrochemical Society , Honolulu, Hawaii, 12-17 oktober, 2008. 2007Refereed articles, books, reports and book chaptersBerger, Robert, Bexell, Ulf, Grehk, Mikael, Hörnström, Sven Erik. A comparative study of the corrosion protective properties of chromium and chromium free passivation methods . Surf. Coat Tech., Vol. 202, No. 2, 2007, pp. 391. Bexell, Ulf, Grehk, Mikael. A Corrosion Study of Hot-Dip Galvanized Steel Sheet Pre-Treated With g-mercaptopropyltrimethoxysilane . Surface and Coatings Technology, Vol. 201, No. 8, 2007, pp. 4734-4742. Fallqvist, Mikael, Olsson, Mikael, Ruppi, Sakari. Abrasive wear of multilayer kappa-Al2O3-Ti(C,N) CVD coatings on cemented carbide
. Wear, Vol. 263, No. 1-6, 2007, pp. 74-80. Fallqvist, Mikael, Olsson, M, Ruppi, S. Abrasive wear of
textured-controlled CVD a-Al2O3 coatings . Surface and coatings technology, Vol. 202, No. 4-7, 2007, pp. 837-843. Granbom, Ylva. Influence of niobium and coiling temperature on the mechanical properties of a cold rolled dual phase steel. Revue de Metallurgie, Vol. 104, No. 4, April , 2007, pp. 191-197. Grehk, Mikael, Engkvist, Josefin, Bexell, Ulf, Richter, Jan H, Karlsson, Patrik G, Sandell, Anders. Initial stages of metal-organic chemical-vapor deposition of ZrO2 on a FeCrAl alloy . Thin Solid Films, Vol. 516, No. 6, 2007, pp. 875-879. Harlin, Peter, Olsson, Mikael. Starch consolidation of M3/2 high speed steel powder - Influence of process parameters on resulting microstructure . Powder Metallurgy, Vol. 50, No. 4, 2007, pp. 345-353. Harlin, Peter, Olsson, Mikael. Starch consolidation of M3/2 high speed steel - Influence of sintering temperature on mechanical properties . Powder Metallurgy, Vol. 50, No. 3, 2007, pp. 232-238. Karlsson, P. G., Richter, J. H., Blomquist, J., Uvdal, P., Grehk, Mikael, Sandell, A.. Metal organic chemical vapor deposition of ultrathin ZrO2 films on Si(1 0 0) and Si(1 1 1) studied by electron spectroscopy . Surface Science, Vol. 601, No. 4, 2007, 2007, pp. 1008-1018. Lindgren, Michael. An Improved Model for the Longitudinal Peak Strain in the Flange of a Roll
Formed U-Channel developed by FE-Analyses . Steel research international, Vol. 78, No. 1, 2007. Lissel, Linda, Engberg, Göran. Prediction of the Microstructural Evolution during Hot Strip Rolling of Nb Microalloyed Steels . Materials Science Forum, Vol. 558-559, 2007, pp. 1127-1132. Malmberg, P., Bexell, Ulf, Eriksson, C., Nygren, H., Richter, K.. Analysis of Bone Minerals by Time-of-Flight Secondary Ion Mass Spectrometry: A Comparative Study Using Monoatomic and Cluster Ions Sources . Rapid Communications in Mass Spectrometry, Vol. 21, No. 5, 2007, pp. 745-749. Michael, Lindgren. Cold roll forming of a U-channel made of high strength steel . Journal of Materials Processing Technology, Vol. 186, No. 1-3, 2007, pp. 77-81. Michael, Lindgren. Experimental investigations of the roll load and roll torque
when high strength steel is roll formed . Journal of Materials Processing Technology, Vol. 191, No. 1-3, 2007, pp. 44-47. Prosek, T., Thierry, D., Olsson, Mikael, Bexell, Ulf. Effects of Chloride-to-Chromate Ratio on the Protective Action of Zinc Surface Films Under Atmospheric Weathering Conditions. Corrosion, Vol. 63, 2007, pp. 258-267. Sandell, A., Karlsson, P. G., Richter, J. H., Blomquist, J., Uvdal, P., Grehk, Mikael. Growth of ultrathin ZrO2 films on Si(100): Film-thickness-dependent band alignment . APPLIED PHYSICS LETTERS, Vol. 88, No. 13, 2006, 2007. Storck, Joakim, Lindberg, Bengt. Assessment of Best Scheduling Practice in Continuous Casting and Hot Rolling of Stainless Steel Strip by System Dynamics Simulation . Key Engineering Materials, Vol. 344, 2007, pp. 897-904. Refereed conference publicationsGrehk, Mikael, Berger, Robert, Bexell, Ulf. Investigation of the drying process of linseed oil using FTIR and ToF-SIMS . Journal of Physics: Conference Series, Vol. 100, 17TH INTERNATIONAL VACUUM CONGRESS (IVC-17) , Stockholm, July 2-6, 2007, 2007. Storck, Joakim, Lindberg, Bengt. A Lean Production Strategy for Hot Charge Operation of a Steel Mill . The IET International Conference on Agile Manufacturing (ICAM'07) , Collingwood College, Durham, U.K., 9-11 July 2007, 2007, pp. 158-167. Storck, Joakim, Lindberg, Bengt. A Cost Model for the Effect of Setup Time Reduction in Stainless Steel Strip Production . Swedish Production Symposium , Göteborg, 2007. Other articles, conference publications, books, patents, reports and book chaptersWang, X.T., Yu, Z.L., Siwecki, Tadeusz, Engberg, Göran, Sun, Z.Q. Physical Modeling on Recrystallization of Austenite in Steels in
Thermo-mechanical Processing. Materials Science Forum, Vol. 561-565, 2007, pp. 1953-1956. 2006Licentiate thesesJonsson, Mikael. TM-rolling of Heavy Plate and Roll Wear
. Licentiate thesis / Luleå University of Technology, , ISSN 1402-1757; 2006:53 , No. 2006:53, Luleå, Luleå : Luleå tekniska universitet/Tillämpad fysik, maskin- och materialteknik/Materialmekanik, 2006. Lissel, Linda. Modeling the microstructural evolution during hot working of C-Mn and of Nb microalloyed steels using a physically based model . Vol. 06/54, Stockholm, Royal Institute of Technology, School of Industrial Engineering and Management, Material Science and Engineering, Division of mechanical Metallurgy, 2006. Sofia, Hansson. Simulation of Stainless Steel Tube Extrusion . Licentiate thesis / Luleå University of Technology, No. 2006:13, Luleå, Luleå University of Technology, 2006. Tunell, Helena. Synthesis and characterization of photosensitive polymers for liquid crystal alignment. Uppsala, Universitetstryckeriet, 2006. Refereed articles, books, reports and book chaptersBerger, Robert, Bexell, Ulf, Stavlid, N., Grehk, Mikael. The Influence of Alkali-Degreasing on the Chemical Composition of Hot-Dip Galvanized Steel Surfaces . Surface and Interface Analysis, Vol. 38, 2006, pp. 1130-1138. Bexell, Ulf, Berger, Robert, Olsson, Mikael, Grehk, Mikael, Sundell, Per-Erik, Johansson, Mats. Bonding of Vegetable Oils to Mercapto Silane Treated Metal Surfaces: Surface Engineering on the Nano Scale . Thin Solid Films, Vol. 515, No. 2, 2006, pp. 838-841. Bexell, Ulf, Stanciu, V., Warnicke, P., Östh, M., Svedlindh, P.. ToF-SIMS Depth Profiling of (Ga,Mn)As Capped With Amorphous Arsenic: Effects of Annealing Time . Applied Surface Science, Vol. 252, No. 19, 2006, pp. 7252-7254. Blomberg, Jonas, Persson, Bengt, Bexell, Ulf. Effects of Semi-isostatic Densification on Anatomy and Cell-Shape Recovery on Soaking. Holzforschung, Vol. 60, 2006, pp. 322-331. Eriksson, C., Börner, K., Nygren, H., Ohlson, K., Bexell, Ulf, Billerdahl, N., Johansson, M.. Studies by Imaging ToF-SIMS of Bone Mineralization on Porous Titanium Implants after 1 Week in Bone . Applied Surface Science, Vol. 252, No. 19, 2006, pp. 6757-6760. Harlin, Peter, Carlsson, Per, Bexell, Ulf, Olsson, Mikael. Influence of Surface Roughness of PVD Coatings on Tribological Performance in Sliding Contacts . Surface and Coatings Technology, Vol. 201, No. 7, 2006, pp. 4253-4259. Tunell, Helena, Selo, Muhammed, Skarp, Kent, Hilborn, Jöns. Synthesis and characterization of main chain polyimides containing chalcone derivatives for LC alignment . Polymer Journal, Vol. 38, No. 7, 2006, pp. 716-723. Valyukh, S., Valyuhk, Iryna, Skarp, Kent. Spectrophotometric determination of reflective liquid crystal cell parameters . Journal of applied physics, Vol. 99, No. 5, 2006, pp. 053102. Refereed conference publicationsSofia, Hansson. A three-dimensional finite element simulation of stainless steel tube extrusion using a physically based material model . ESAFORM , Glasgow, UK, 26-28 April 2006, 2006. Tunell, Helena, Osterman, Jesper, Selo, Muhammed. Photoinduced reorientation and LC alignment of novel azobenzene-containing monomers. Vol. 47, No. 2, American Chemical Society Polymer Division Meeting, San Francisco, 2006, pp. 1037-1038. Other articles, conference publications, books, reports and book chaptersBerger, Robert, Bexell, Ulf, Grehk, Mikael, Hörnström, Sven Erik. Properties of Chromate Free Passivations for Hot-Dip Galvanized Steel. CORROSION/2006, San Diego, California, USA, 2006. Other articles, conference publications, books, patents, reports and book chaptersFilipovic, Mirjana, Eriksson, Conny, Överstam, Henrik. Behaviour of Surface Defects in Wire Rod Rolling . Steel research international, Vol. 77, No. 6, 2006, pp. 439-444. 2005DissertationsCarlsson, Per. Surface engineering in sheet metal forming. Digital Comprehensive Summaries of Uppsala Dissertations from the Faculty of Science and Technology, No. 7, Uppsala, Acta Universitatis Upsaliensis, 2005. (91-554-6136-0) Domkin, Konstantin. Constitutive models based on dislocation density : formulation and implementation into finite element codes. Doctoral thesis / Luleå University of Technology, No. 2005:35, Luleå, Luleå Tekniska Universitet, 2005. Osterman, Jesper. Investigations of optical properties and photo-alignment in bistable nematic liquid crystal displays. Digital Comprehensive Summaries of Uppsala Dissertations from the Faculty of Science and Technology, No. 115, Uppsala, Acta Universitatis Upsaliensis, 2005. (91-554-6389-4) Refereed articles, books, reports and book chaptersKozlovsky, M., Skarp, Kent. Kinetically controlled phase transitions in LC polymers. J. polymer science B polymer physics ed., 2005. Osterman, Jesper, Adås, Christian, Madsen, Louise, Skarp, Kent, Tong, Au Ping, XiHua, Li, Chigrinov, Vladimir. Properties of Azo-Dye Alignment Layer on Plastic Substrates . Journal of SID, Vol. 36, No. 1, 2005, pp. 772-775. Selo Mustafa, Muhammed, Osterman, Jesper, Tunell, Helena, Skarp, Kent, Kozlovsky, M.. Synthesis, spectroscopic characterisation and alignment of novel azobenzene containing monomers. Liquid crystals, 2005. Stanciu, V., Wilhelmsson, O., Bexell, Ulf, Adell, M., Sadowski, J., Kanski, J., Warnicke, P., Svedlindh, P.. Influence of annealing parameters on the ferromagnetic properties of optimally passivated (Ga,Mn)As epilayers . Physical Review B, Vol. 72, 2005, pp. 125324. Valyukh, S., Osterman, Jesper, Valyuhk, Iryna, Skarp, Kent. Characterization of flexible reflective liquid crystal cells. Journal of SID, Vol. 12, 2005. Refereed conference publicationsHansson, Sofia, Domkin, Konstantin. Physically based material model in finite element simulation of extrusion of stainless steel tubes . 8th International Conference on Technology of Plasticity (ICTP) , Verona, Italy, 9-13 oktober 2005, 2005. Lindgren, Michael. Finite element model of roll forming of a u-channel profile . 8th International Conference on Technology of Plasticity , Verona, 9-13 oktober 2005, 2005. Osterman, Jesper, Adås, C., Madsen, L., Skarp, Kent, Tong, A.P., Xihua, L., Chigrinov, V.. Properties of azo dye alignment layer on plastic substrates. Vol. 36, SID international symposium, Boston, 2005, pp. 772. Osterman, Jesper, Tong, P., Zhukov, A., Skarp, Kent, Chigrinov, V., Kwok, H.S.. Mechanically Stabilized Bistable FLC Cells on Flexible Substrates . Eurodisplay 2005 , Edinburgh, Scotland, 20-22 September 2005, 2005. Valyukh, S., Osterman, Jesper, Skarp, Kent, Chigrinov, V.. Optical performance of bistable reflective and transflective ferroelectric LCDs. Vol. 36, SID international symposium, Boston, 2005, pp. 702. Wang, Lu, Birgerson, J., Osterman, Jesper, Skarp, Kent, Voit, W.. Inkjet printing of linearly photopolymerizable polymer as alignment in LCD. Vol. 36, SID international symposium, Boston, 2005, pp. 1076. Other articles, conference publications, books, reports and book chaptersBorgström, Henrik, Paiar, T, Harlin, Peter, Nyborg, Lars. Super-solidus Liquid Phase Sintering of Starch Consolidated M4 High Speed Steel Powder. EPMA 2005, Prague, Oct 2005, 2005. Other articles, conference publications, books, patents, reports and book chaptersEngberg, Göran, Karlsson, Lars. Analysing metal working processes . I: Fundamentals of metallurgy, Seetharaman, Seshadri;, Cambridge, Woodhead Publishing ltd, 2005. (978-1-85573-927-7) 2004Licentiate thesesOsterman, Jesper. Optical properties of bistable nematic LCD structures. UPTEC, No. 03006, Uppsala, Uppsala Universitet. DEpartment of Engineering Sciences, 2004. Refereed articles, books, reports and book chaptersBexell, Ulf, Grehk, Mikael, Olsson, Mikael, Gelius, Ulrik. XPS and AES Characterisation of hydrolysed ?-
Mercaptopropyltrimethoxysilane deposited on Al, Zn and Al-43.4Zn-1.6Si alloy coated steel . Surface
and Interface Analysis, No. 36, 2004, pp. 624-631. Birgerson, Jonas, Keil, M, Luo, Y, Ågren, H, Salaneck, W.R. A study of the electronic structure of ethylenedioxythiophene in gasphase using NEXAFS and quantum chemical calculations. Chem. Phys. Let., No. 392, 2004, pp. 100-104. Birgerson, Jonas, Lindsjö, A, Selo Mustafa, Muhammed, Grehk, Mikael, Skarp, Kent. Spectroscopic study of chemically stabilized dichroic thin crystal films . Applied Surface Science, No. 236, 2004, pp. 444-450. Birgerson, J., Lindsjö, A., Selo Mustafa, Muhammed, Grehk, Mikael, Skarp, Kent. Spectroscopic study of chemically stabilized dichroic thin crystal films. Applied surface science, Vol. 236, 2004, pp. 444. Friedlein, R, Sorensen, S.L, Baev, A, Gel'mukhanov, F, Birgerson, Jonas, Crispin, A, Jong, M.P d., Osikowicz, W, Murphy, C, Ågren, H, Salaneck, W.R. Role of electronic localization and charge-vibrational coupling in resonant photoelectron spectra of polymers : Application to poly-(para-phenylenevinylene). Phys. Rev. B, Vol. 69, 2004, pp. 125204. Marciniak, S, Crispin, X, Uvdal, K, Trzcinski, M, Birgerson, Jonas, Louwet, F, Salaneck, W.R.. Light induced damages in Poly(3,4-ethylenedioxythiophene) and its deratives : a photoelectron spectroscopy study. Synthetic Metals, Vol. 141, No. 1-2, 2004, pp. 67-73. Refereed conference publicationsBirgerson, Jonas, Selo Mustafa, Muhammed, Lindsjö, A, Skarp, Kent. Stabilization of Thin Crystal Film Polarizers for LCD's. I: Proceedings of SID 2004, Seattle, USA, 2004, pp. 590-593. Johansson, M, Samuelsson, J, Bexell, Ulf, Sundell, P.-E. Fatty Acid Derivatives in Radiation Curable Coatings . I: Proceedings of e|5: UV & EB Technology Conference, Charlotte, NC, USA, May 2-5, 2004. Kozlovsky, M., Lymarenko, R., Wang, Lu, Haase, W.. Chiral photochromic liquid crystalline polymers for holographic applications. Vol. 5521, Proc. of SPIE, 2004, pp. 85. Osterman, Jesper, Skarp, Kent. Anchoring Energy Control and Bistable Surface Switching Based on Photo-Alignment Technology. Vol. 35, SID international symposium, Seattle, US, 2004, pp. 1208. Valyuhk, Iryna, Valyukh, S., Skarp, Kent. Theoretical study of the optical properties of low voltage stacked cholesteric liquid-crystal displays. Asia display, 2004, pp. 479. Valyukh, S., Osterman, Jesper, Adås, C., Skarp, Kent. Cell gap measurements of flexible reflective TN- and STN-LC cells. Vol. 35, SID international symposium, 2004, pp. 196. Valyukh, S., Valyukh, I., Adås, C., Chigrinov, V., Skarp, Kent. Reflective liquid crystal cell parameters. Asia display, 2004, pp. 479. Other articles, conference publications, books, reports and book chaptersEngkvist, Josefin, Bexell, Ulf, Grehk, Mikael, Olsson, Mikael. ToF-SIMS Analysis of a FeCrAl Alumina Forming Alloy. SIMS Europe 2004, Münster, Germany, 26-29 September , 2004. 2003DissertationsBexell, Ulf. Surface Characterisation Using ToF-SIMS, AES and XPS of Silane Films and Organic Coatings Deposited on Metal Substrates . Comprehensive Summaries of Uppsala Dissertations from the Faculty of Science and Technology, No. 843, Uppsala, Acta Universitatis Upsaliensis, 2003. (91-554-5644-8) Refereed articles, books, reports and book chaptersBexell, Ulf, Carlsson, Per, Olsson, Mikael. Tribological Characterisation of an Organic Coating by the use of ToF-SIMS . Applied Surface Science, Vol. 203-204, 2003, pp. 596-599. Bexell, Ulf, Olsson, Mikael. Time-of-Flight SIMS Characterisation of hydrolysed g-Mercaptopropyltrimethoxysilane deposited on Al and Zn. Surface and Interface Analysis, No. 35, 2003, pp. 880-887. Bexell, Ulf, Olsson, Mikael, Johansson, M, Samuelsson, J, Sundell, P.-E. A Tribological Study of a Novel Pre-Treatment With Linseed Oil Bonded to Mercaptosilane Treated Aluminium . Surface and Coatings Technology, No. 166, 2003, pp. 141-152. Johansson, M, Samuelsson, J, Sundell, P.-E, Bexell, Ulf, Olsson, Mikael. Radiation Induced Polymerization of Monomers From Renewable Resources. Polymer Preprints, Vol. 44, No. 1, 2003, pp. 19-20. Jönsson, S.K.M., Birgerson, J., Crispin, X., Greczynski, G., Osikowicz, W., v.d.Gon, A.W.D., Salanek, W.R., Fahlman, M.. The effects of solvents on the morphology and sheet resistance in poly(3,4-ethylenedioxythiophene)-polystyrenesulfonic acid (PEDOT-PSS) films. Synth. Met., Vol. 139, 2003, pp. 1. Jönsson, S.K.M, Birgerson, Jonas, Crispin, X, Greczynski, G, Osikowicz, W, Denier van der Gon, A.W, Salaneck, W.R, Fahlman, M. The effects of solvents on the morphology and sheet resistance in poly(3,4-ethylenedioxythiophene)-polystyrenesulfonic acid (PEDOT-PSS) films . Synthetic Metals, Vol. 139, No. 1, 2003, pp. 1-10. Osterman, Jesper, Skarp, Kent. Optical modes for direct-view single-polarizer reflective BTN-LCD . Optics Express, Vol. 11, 2003, pp. 1197-1202. Valyuhk, Iryna, Slobodyanyuk, A, Valyukh, S, Osterman, Jesper, Skarp, Kent. Using the Jones matrix for simulation of light propagation in anisotropic media . Journal of Optical Technology, Vol. 70, 2003, pp. 470. Refereed conference publicationsBexell, Ulf, Olsson, Mikael, Johansson, M, Sundell, P.-E, Carlsson, Per, Hellsing, Magnus. A ToF-SIMS Study of Linseed Oil Bonded to Mercaptosilane Treated Aluminium . Proceedings of the 14th International Conference on Secondary Ion Mass Spectrometry, SIMS XIV , San Diego, California, USA, September 14-19, 2003. Engkvist, Josefin, Bexell, Ulf, Grehk, Mikael, Olsson, Mikael. ToF-SIMS Depth Profiling of Alumnia Formed on a FeCrAl High Temperature Alloy. I: Proceedings of the 14th International Conference on Secondary Ion Mass Spectrometry, San Diego, California, USA, September 14-19, 2003. Osterman, Jesper, Madsen, L., Birgerson, J., Skarp, Kent. Optical properties of single-polarizer reflective bistable nematic displays. Vol. 34, SID international symposium, Baltimore, US, 2003, pp. 950. Valyuhk, Iryna, Slobodyanyuk, A., Lymarenko, R., Skarp, Kent. Optical properties of monochromatic double-layer cholesteric liquid crystal displays. Advanced display technologies, Moscow, Russia, 2003. Valyuhk, Iryna, Slobodyanyuk, A., Skarp, Kent. Optical characteristics of double-layer cholesteric liquid crystal displays. International display research conference, 2003, pp. 203. Valyuhk, Iryna, Slobodyanyuk, A, Lumarenko, R, Skarp, Kent. Optical Proporties of Monochromatic Double-Layer Cholesteric Liquid Crystal Displays. I: Proceedings of XII International Symposium Advanced Display Technologies, Moscow, Russia, 2003, pp. 258-261. Valyuhk, Iryna, Slobodyanyuk, A, Skarp, Kent. Optical Characteristics of Double-layer Cholesteric Liquid Crystal Displays. I: Proceedings of International Display Research Conference (IDRC), Phoenix, USA, 2003, pp. 203-206. Valyukh, S., Osterman, Jesper, Skarp, Kent. Simple Spectroscopic Method to Measure Cell Gap and Twist Angle of TN-LCD. Vol. 23, International display research conference, 2003, pp. 199. Valyukh, S., Rybalochka, A., Sorokin, V., Tytarenko, P., Skarp, Kent. A method for measuring reflective twist nematic liquid crystal cell properties. Advanced display technologies, Moscow, Russia, 2003. Valyukh, S, Rybalochka, A, Sorokin, V, Tytarnenko, T, Skarp, Kent. A method for measuring reflective twist nematic liquid crystal cell proporties. I: Proceedings of XII International Symposium Advanced Display Technologies, Moscow, Russia, 2003, pp. 254-257. 2002Refereed articles, books, reports and book chaptersBirgerson, J., Janssen, F.J.J., v.d.Gon, A.W.D., Tsukahara, Y., Kaeriyama, K., Salanek, W.R.. Doped polymeric cathodes for PPV/Al based LEDs. Synth. Met., Vol. 132, 2002, pp. 57. Keil, M., Samori, P., d.Santos, D.A., Birgerson, J., Freidlein, R., Dkhissi, A., Watson, M., Mullen, K., Brédas, J.L., Rabe, J.P., Salanek, W.R. High levels of alkali metals storage in thin films of hexa-peri-hexabenzocorone. J. Chem. Phys, Vol. 116, 2002, pp. 10854. v.d.Gon, A.W.D., Birgerson, J., Fahlman, M., Salanek, W.R. Modification of PEDOT-PSS by low energy electrons. Organic electronics, Vol. 3, 2002, pp. 111. Valyuhk, Iryna, Slobodyanyuk, A., Valyukh, S., Sorokin, V., Osterman, Jesper, Skarp, Kent. On accuracy of the Jones matrix method for simulation of light propagation in twisted nematic liquid crystals . Proc. of the 11th Int. Symp. Advanced Display Technologies, Ukraine, 2002, pp. 212. Refereed conference publicationsBirgerson, J., Osterman, Jesper, Skarp, Kent. Possibilities for high pretilt bistable twisted nematics. Vol. 22, Eurodisplay 2002, Nice, France, 2002, pp. 491. Osterman, Jesper, Birgerson, J., Skarp, Kent. Single polarizer reflective BTN with inner retardation compensation . Vol. 9, International display workshops , Hiroshima, Japan, 2002, pp. 101. Osterman, Jesper, Birgerson, J., Skarp, Kent. Optical modes for single polarizer reflective BTN. Vol. 22, Eurodisplay 2002, Nice, France, 2002, pp. 479. Skarp, Kent, Adås, C., Franklin, G., Drejholt, E., Westling, T.. Development of flexible LCDs. Asian symposium on information display, 2002, pp. 163. Valyuhk, Iryna, Slobodyanyuk, A., Valyukh, S., Sorokin, V., Osterman, Jesper, Skarp, Kent. Simulation of light scattered by reflective polarizer with a rough metallic surface. Vol. 22, Eurodisplay 2002, Nice, France, 2002, pp. 487. Other articles, conference publications, books, patents, reports and book chaptersValyukh, S., Rybalochka, A., Sorokin, V., Slobodyanyuk, A.. Spectroscopic method to measure cellgap of TN LC cells. Proc. of Eurodisplay 2002, Nice, 2002. 2001Refereed articles, books, reports and book chaptersBexell, Ulf, Olsson, Mikael. Characterisation of a Non-Organofunctional Silane Film Deposited on Al, Zn and Al-43.4Zn-1.6Si Alloy-Coated Steel, Part I. Surface Characterization by ToF-SIMS . Surface and Interface Analysis, Vol. 31, No. 3, 2001, pp. 212-222. Bexell, Ulf, Olsson, Mikael. Characterisation of a Non-Organofunctional Silane Film Deposited on Al, Zn and Al-43.4Zn-1.6Si Alloy Coated Steel, Part II. Interfacial Characterization by ToF-SIMS and AES . Surface and Interface Analysis, Vol. 31, No. 3, 2001, pp. 223-231. Carlsson, Per, Bexell, Ulf, Olsson, Mikael. Friction and Wear Mechanisms of Thin Organic Permanent Coatings Deposited on Hot-Dip Coated Steel . Wear, Vol. 247, No. 1, 2001, pp. 88-99. Carlsson, Per, Bexell, Ulf, Olsson, Mikael. Tribological Performance of Thin Organic Permanent Coatings Deposited on 55%Al-Zn Coated Steel – Influence of Coating Composition and Thickness on Friction and Wear . Wear, Vol. 251, No. 1-12, 2001, pp. 1075-1084. Other articles, conference publications, books, reports and book chaptersCarlsson, Per, Bexell, Ulf, Hörnström, Sven Erik. Corrosion Behaviour of Aluzink with Different Passivation Treatments. GALVATECH 2001, Brussels, Belgium, 26-28 June, 2001. Carlsson, Per, Bexell, Ulf, Olsson, Mikael. Automatic Scratch Testing - A New Tool for Evaluating the Stability of Tribological Conditions in Sheet Metal Forming. GALVATECH 2001, Brussels, Belgium, 26-28 June , 2001. Valyukh, S., Slobodyanyuk, A., Sorokin, V., Skarp, Kent. Computer simulation of scattering properties of cholesteric liquid crystal displays. European conference on liquid crystals, Halle, Germany, 2001, pp. 28. 2000Refereed articles, books, reports and book chaptersCarlsson, Per, Bexell, Ulf, Olsson, Mikael. Tribological Behaviour of Thin Organic Permanent Coatings Deposited on Hot-Dip Coated Steel Sheet - a Laboratory Study . Surface and Coatings Technology, Vol. 132, No. 2-3, 2000, pp. 169-180. Grehk, Mikael, Göthelid, Mats, Björkqvist, Magnus, Le Lay, Guy, Karlsson, Ulf. Li-induced phase transition from the Ge(111)3x1:Li surface reconstruction to the Ge(111)rot3xrot3:Li lithium germanid . Physical Review B (ISSN 1098-0121), Vol. 61, No. 7, 2000, pp. 4963-4967. Other articles, conference publications, books, reports and book chaptersFranklin, G., Drejholt, E., Skarp, K.. Evaluation of liquid crystal thin film polarizers coated on the inside and outside of LCDs. International conference on coatings on glass, 2000, pp. 641. 1999Refereed conference publicationsBexell, Ulf, Carlsson, Per, Olsson, Mikael. Characterisation of Thin Films of a Non-Organofunctional Silane on Al-43.4Zn-1.6Si Alloy Coated Steel by ToF-SIMS . SIMS XII , Brussels, Belgium, 5-10 September, 1999. Rybalochka, A., Sorokin, V., Valyukh, S., Skarp, Kent, Palmer, S.. Selection of cholesteric liquid crystals for liquid crystal display with high multiplexing level. Advanced display technologies, 1999, pp. 59. 1998Refereed articles, books, reports and book chaptersBlinov, L., Kozlovsky, M., Ozaki, M., Skarp, Kent, Yoshino, K.. Photo-induced dichroism and optical anisotropy in a liquid crystalline azobenzene side chain polymer caused by anisotropic angular distribution of trans and cis isomers. Journal of applied physics, Vol. 84, 1998, pp. 3860. 1997Refereed conference publicationsHörnström, Sven Erik, Bexell, Ulf, van Ooij, Wim. J., Zhang, J.. Characterisation of Thin Films of Organofunctional and Non-Functional Silanes on 55Al-43.4Zn-1.6Si Alloy Coated Steel. ECASIA 97, Gothenburg, Sweden, 1997. Other articles, conference publications, books, reports and book chaptersCarlsson, Per, Bexell, Ulf, Olsson, Mikael, Klang, Hans. A Study of the Initial Stages of Atmospheric Corrosion of Formed Hot Dip Zinc Coated Steel . EUROCORR-97 , Trondheim, Norway, 1997. Carlsson, Per, Bexell, Ulf, Olsson, Mikael, Klang, Hans. Initial Atmospheric Corrosion Behavior of Formed Hot Dip Zinc Coated Steel - An Energy Dispersive X-ray Spectroscopy Study. SCANDEM-97, Gothenburg, Sweden, 1997. |